ZJ
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
REMOVAL AND INSTALLATION
FRONT BUMPER/FASCIA . . . . . . . . . . . . . . . . . . 1
REMOVAL AND INSTALLATION
FRONT BUMPER/FASCIA
REMOVAL
The Grand Cherokee front bumper is actually a bumper
fascia incorporated with a lower welded crossmember. The
lower crossmember is a fixed welded structure. To replace
the crossmember a frame machine should be used to cor-
rectly align the crossmember to the unibody.
(1) Remove grille screws at grille opening rein-
forcement (GOR) (Fig. 1).
(2) Unsnap lower clips at grille. Remove grille
from (GOR).
(3) Remove turn signals, side markers and headlamps.
Refer to Group 8L, Lamps for service information.
(4) Remove the retainers at the front fascia (Fig. 2).
(5) Remove the plastic rivets at each front wheel
well (Fig. 3).
Fig. 1 Grille Removal
FRAME AND BUMPERS
CONTENTS
page
FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BUMPERS
INDEX
page
FRAME AND BUMPERS
REAR BUMPER FASCIA . . . . . . . . . . . . . . . . . . . 2
REAR BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fig. 2 Lower Fascia Removal
Fig. 3 Wheel Well Retainers
13 - 1
page
page