Port - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.4.7.4. Usage Guideline
If an outbound dial peer is selected for an inbound call and if more than one
dial peers are selected, a hunting group will be made.
If a huntstop has been set already in a certain dial peer and if the outbound
call to that dial peer fails, a call will be terminated without hunting other dial
peers.
5.7.4.7.5. Examples
The following example is to perform huntstop in VoIP peer 110.
dial-peer voice 110 VoIP
huntstop
5.7.4.8.

port

To associate a dial peer with a specific voice port, use the port dial-peer
configuration command. Use the no form of this command to cancel this
association.
port slot/port
no port
5.7.4.8.1. Syntax
Keyword / Argument
Slot
port
5.7.4.8.2. Default Value
No port is configured.
AddPac Technology Co.,Ltd.
Description
Slot number where the voice interface card is
installed. Valid entries are 1 or 0.
Port number for voice port number of voice
interface module. Valid entries are 1 to 7.
240
- -