Voice Processing Interfaces - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
This interface is implemented using standard RJ-45 connector interface.
1-Port Async Serial Interface for Console Port (RJ45)
AP200 VoIP Residential Gateway provides the network management features
using Asynchronous serial interface port.
This interface is implemented using standard RJ-45 connector interface.

Voice Processing Interfaces

The FXS type Voice Processing Modules on board of AP200 RGW are Analog
Line Interface solutions which can interface to general Phone, FAX Machine,
PBX.
FXS Interface Voice Processing Module
PSTN back up port
Using these Voice Interface Modules, AP200 RGW provides data networking
service as well as VoIP service.
Note : To know the detailed Voice Interface configuration, please reference
the order information of AP200 RGW.
1~2-Ports FXS Voice Interface(RJ11)
AP200 VoIP Residential Gateway supports One(1) or Two(2) Port FXS(Foreign
Exchange Station) Voice Interface Module . Using these FXS Voice Interface
Module, AP200 VoIP RGW provides analog Line Interface solutions which can
interface to general Phone, FAX Machine, etc.
1-Port PSTN Backup Voice Interface Module
AP200 RGW supports One(1) Port RJ11 connector type PSTN backup Interface
port which can be connected to analog subscriber module of PSTN switch
directly. This backup Interface can be used for voice communication via PSTN
when VoIP service is not available due to network fault, Gatekeeper problem,
etc .
AddPac Technology Co.,Ltd.
29
- -