AddPac VoiceFinder AP200 User Manual page 27

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
AP200-C Type Model
Figure 1-9 shows the "Type C"
Residential Gateway. (AP200 Model C)
[Figure 1-9 Back Side Panel Diagram of VoiceFinder AP200 Model C VoIP RGW]
Following Table 1-4 explains the "Type C" interface of AP200 VoIP Residential
Gateway.
No.
(1)
(2)
(3)
(4)
(5)
(6)
[Table 1-4 The explanation of Back Side Panel Interfaces of AP200 Model C
RGW]
Following Figure 1-10 shows the Back panel interface picture of AP200 Model C
VoIP Residential Gateway.
AddPac Technology Co.,Ltd.
Power PSTN FXS0 FXS1
Interface
DC Power External DC Power Supply Input. (DC 5V)
This port is used to connect PSTN Analog Line for
PSTN
PSTN backup. (RJ11)
1 FXS Port : As FXS Voice Interface Port, Phone
FXS 0
or Fax Machine can be connected.(1x RJ11)
LAN0 10Mbps Ethernet Port for WAN interface. (RJ45)
LAN1 10Mbps Ethernet Port for LAN interface. (RJ45)
RS-232C serial port for system management.
Console
(RJ45)
Interface configuration of AP200 VoIP
LAN0 LAN1
Explanation
CONSOLE
27
- -