Voice Service - AddPac VoiceFinder AP200 User Manual

Voicefinder ap200 voip gateway (residential gateway)
Hide thumbs Also See for VoiceFinder AP200:
Table of Contents

Advertisement

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
FXO port or indirectly attempt calls to the PSTN through the PBX internal line,
unauthorized remote users can attempt calls as well. To prevent unauthorized
users' attempting calls, the security shall be kept. Two security systems that
AP200 provides have following advantages and disadvantages.
With "security permit-FXO" command, remote users does not need to enter the
password so they can easily access the network.
However, IP address of the VoIP peer on the other side shall be registered and
the gatekeeper cannot be used at the same time. Also, it is impossible to bar
calls of the registered peers by class.
With the "voice class user" users need to enter the password digit but stronger
and multi-classed call barring is possible.
5.7.2.11.5.
Examples
Following example shows generation of user class 1and setting of user class
mode.
voice class user 1
password 1234
max-digits 10
exit
5.7.2.12.

voice service

To specify the voice encapsulation type, use the voice service command in
global configuration mode. To exit voice-service configuration mode, use the
exit command.
voice service VoIP
5.7.2.12.1.
Syntax
Keyword / Argument
VoIP
AddPac Technology Co.,Ltd.
Specifies Voice over IP (VoIP) parameters.
Description
212
-
-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VoiceFinder AP200 and is the answer not in the manual?

Table of Contents