Commands Of The User Mode - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

4.2.1. Commands of the User Mode

Every person who logged in the Gateway can use commands of the user
mode.
The prompts is indicated as "1router >" in the user mode.
Command
clock
exit
help
history
ping
rlogin
show
telnet
traceroute
user
AddPac Technology Co.,Ltd.
Displays commands currently available and description of
?
these commands.
Indicates system time.
Logs out the operator from the Gateway.
Explains command-using method in an interactive way.
Shows history of the used command lines.
Sends an echo message to another network device and tests
if the echo message reaches the destination.
Establishes rlogin connection that is similar to the Telnet by an
original login.
Shows configuration status and operating status of the
Gateway.
shows only limited information.
Establishes a protocol connection to log in a neighboring
network device through a virtual terminal.
Traces the path the packet passes through to reach the
destination.
Adds a Gateway user or shows user information of the
Gateway. With this command, the current user cannot check
information of the user who has higher authority than
him/herself.
Description
However, in the user mode, "show" command
52
- -