AddPac VoiceFinder AP200 User Manual page 114

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
copy {startup-clear/running-config}
1. Saves or deletes configuration data.
2. Command options are as follows:
Debug <Option>
1. Decodes packets passing the Gateway and indicates if the Gateway
2. For more information and options, see "4.13 Fault Handling and
3. When disabling Debug, use "no debug" or "Un-debug" commands.
exit
1. Exists from the current mode, and enters into the next lower mode.
2. If the user uses "exit" command in the Exec mode, the user needs to log
help
Describes the interactive help system.
history
1. Shows commands history.
2. The AP200 Gateway keeps maximum 25 histories for each mode.
3. To use a command again used in History, enter "! History#."
no {option}
An important command to negate commands used or set.
AddPac Technology Co.,Ltd.
1) startup-clear: Deletes configuration data that is saved in the flash
memory of the present Gateway.
2) running-config: Saves currently running configuration information in
the Gateway.
normally operates.
Debugging."
in again.
114
- -