Clear Voice Port; Show Call Active - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.6.2.

clear voice port

To force a disconnect on a call on a specific voice port, use the clear voice
port command in Administrator command mode. If port is not specified,
disconnect all calls on the system.
clear voice port port]
5.7.6.2.1. Syntax
Keyword / Argument
port
5.7.6.2.2. Default Value
None
5.7.6.2.3. Command Mode
Administrator command
5.7.6.2.4. Usage Guideline
None
5.7.6.2.5. Examples
The following example forces all active calls:
clear voice port
5.7.6.3.

show call active

To display active call information for voice calls or fax transmissions in progress,
use the show call active command in Administrator command
show call active { all/summary }
AddPac Technology Co.,Ltd.
Description
Specifies a port to clear calls on the port..
290
- -