Starting Gateway Configuration - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.4.

Starting Gateway Configuration

To set up the Gateway, log in the configuration mode.
configuration mode, the user shall know the manager password. If the user
does not know proper commands, the user can use "Help" or "?" function.
[Procedure]
[Example] Starting Gateway Configuration Mode
The System is ready. Please login to system.
login: root
set as "root" in the factory.)
password:******
"router" in the factory.)
AP200 Login: root at Console on Thu Jan 11 11:28:34 2001
1 router# configure
mode.
1 router(config)#
AddPac Technology Co.,Ltd.
Order
1 Boot the Gateway and log in with the manager's account.
2 Move to the configuration mode.
1 Gateway# configure
2 Gateway(config)#
☞ Enter the manager's account. (The manager's ID is
☞ Enter the password. (The password is set as
☞ Enter the command to move to the configuration
☞ Configuration is possible in this mode
Operation and Related Commands
To log in the
60
- -