AddPac VoiceFinder AP200 User Manual page 273

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.17.2. Default Value
The default status value is late mode.
5.7.5.17.3. Command Mode
Voice-Service Configuration Mode
5.7.5.17.4. Usage Guideline
This command supports one of global voice service parts for VoIP services. This
command is able to use at a point of time under transmission CONNECT of
H.245 call processing based logical call using the AP200 VoIP gateway or
remote other gateway doing starting h323 call.
It may be possible to cut a front of real voice sound in case of opening voice
channel after CONNECT message with hooking off other side under default
configuration late mode. To avoid this phenomenon, use h323 call channel
early mode to open voice channel before other side hooking off.
5.7.5.17.5. Examples
The following command example shows fast voice channels
voice service VoIP
h323 call channel early
AddPac Technology Co.,Ltd.
CONNECT in case
processing, use this command.
of normal(slow)
273
-
voice
-