Miscellaneous Commands; Clear H323 Call - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

5.7.6. Miscellaneous Commands

5.7.6.1.

clear h323 call

To force a disconnect on a specific call or for all calls active with remote user,
use the clear h323 call command in Administrator command mode.
clear h323 call { all | local_call_ID }
5.7.6.1.1. Syntax
Keyword / Argument
all
local_call_ID
5.7.6.1.2. Default Value
No Default Value
5.7.6.1.3. Command Mode
Administrator command
5.7.6.1.4. Usage Guideline
If you want to force a particular call to be disconnected (as opposed to all
active calls on the gatekeeper), use the CallID number to identify that specific
call. You can find the local CallID number for a specific call by using the show
call active all command; the ID number is displayed in the CallID column.
5.7.6.1.5. Examples
The following example forces all active calls:
clear h323 call all
AddPac Technology Co.,Ltd.
Description
Forces all active calls currently associated with this
gatekeeper to be disconnected.
Specifies the local call identification number
(CallID) that identifies the call to be disconnected.
289
- -