Connection - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.3.1.5. Example
The following example enables background noise on the AP200 Gateway:
voice-port 1
no comfort-noise
5.7.3.2.

connection

To specify a connection mode for a voice port, use the connection command
in voice-port configuration mode. To disable the selected connection mode,
use the no form of this command.
connection { plar } string
no connection { plar } string
5.7.3.2.1. Syntax
Keyword / Argument
plar
string
5.7.3.2.2. Default Value
No connection mode is specified.
5.7.3.2.3. Command Mode
Voice-port configuration Mode
AddPac Technology Co.,Ltd.
Description
Specifies a private line automatic ringdown (PLAR)
connection. PLAR is an autodialing mechanism
that permanently associates a voice interface with
a far-end voice interface, allowing call completion
to a specific telephone number or PBX without
dialing. When the calling telephone goes off-hook,
a predefined network dial peer is automatically
matched, which sets up a call to the destination
telephone or PBX.
Specifies the destination telephone number. Valid
entries are any series of digits that specify the E.164
telephone number.
217
- -