Register - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
gateway
public-ip xxx.xxx.xxx.xxx
5.7.5.22.

register

To make registration into gatekeeper, uses register command in gateway
configuration mode. To cancel registration into gatekeeper, use "no"
command before this command.
register
no register
5.7.5.22.1. Syntax
Keyword / Argument
5.7.5.22.2. Default Value
The default status is disable mode.
5.7.5.22.3. Command Mode
Gateway Configuration Mode
5.7.5.22.4. Usage Guideline
To make enable function for H.323 VoIP gateway, uses register command. If
VoIP gateway is enable, this VoIP gateway try to look for gatekeeper using
H.323 RAS GRQ or RRQ message. If you use no register command, AP200 VoIP
gateway is able to cancel registration from gatekeeper using H.323 RAS URG
message.
If you want to change or register new dial peer using script file with operating
gatekeeper, use no register (or no gateway) command in initial stage of script
file or loading configuration after doing un-registration from gatekeeper.
AddPac Technology Co.,Ltd.
There is no any specific keyword and argument in this command set.
Description
278
- -