AddPac VoiceFinder AP200 User Manual page 115

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
ping [-flt] [-s source-ip-address] Target-host-IP [ datasize(max:1500) ]
[ npakcets ]
1. Sends echo messages.
2. Command options are as follows:
reboot
Reboots the Gateway system.
rlogin [-l username] target-host
Opens the Rlogin connection.
show {option}
1. Shows information that has been set in the Gateway or collected by
2. For more information and options, see "4.13 Fault Handling and
telnet { target-host-ip }
Opens a Telnet connection in the remote host.
test { memory/interface } [ Ethernet/hdlc ] [ main-interface.sub-interface]
1. Tests the Gateway itself.
2. Command options are as follows:
traceroute [-w waittime] [-m max_ttl] [-s src_addr] host [packetlen]
Checks the path that can be accessed through a remote host.
AddPac Technology Co.,Ltd.
1) [-f: fast send mode]
2) [-l: loopback mode for HDLC]
3) [-t: sends one datagram per seconds]
4) [-s: specify the sending interface IP address]
the Gateway. With this function, the user can check operation status
of the Gateway.
Debugging."
1) memory: Tests the Gateway memory.
2) interface: Performs the loopback test for the designated interface.
115
- -