H323 Call Start - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
starth245 call procedure if TCP connection for H.245 procedure is not OK
before CONNECT message.
5.7.5.8.5. Example
Following example shows that force-starth245 command activates the
startH245 VoIP signaling procedure.
voice service voip
force-starth245
5.7.5.9.

h323 call start

To force the H.323 Version 2 gateway to use Fast Connect or Slow Connect
procedures for all H.323 calls, use the h323 call start command in voice-service
configuration mode. To restore the default condition, use the no form of this
command.
h323 call start { fast | slow | preferred-slow }
no h323 call start
5.7.5.9.1. Syntax
Keyword / Argument
fast
slow
preferred-slow
5.7.5.9.2. Default Value
The default is fast.
AddPac Technology Co.,Ltd.
Description
Gateway uses H.323 Version 2 (Fast Connect)
procedures
Gateway uses H.323 Version 1 (Slow Connect)
procedures.
If you configure this option, at the time to make a
call, Gateway use
procedure. At the time to receive a call, Gateway
use slow start (normal start) or fast start procedure
depends on calling party's configuration.
slow start (normal
262
-
start)
-