Sid - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.4.13.4. Usage Guideline
When a dial peer is shut down, you cannot initiate calls to that peer. This
command is applicable to both VoIP and POTS peers.
5.7.4.13.5. Examples
The following example changes the administrative state of voice telephony
dial peer 10 to down:
configure
dial-peer voice 10 pots
shutdown
5.7.4.14.

sid

When SID Packet transmission function is enable during silence processing
under VAD function activation for call processing of specific dial-peer, use sid
command in dial-peer configuration mode. If you want to set disable mode,
add no command in front of sid command.
sid
no sid
5.7.4.14.1. Syntax
Keyword / Argument
5.7.4.14.2. Default Value
The default value is enable mode status.
5.7.4.14.3. Command Mode
Dial-Peer Configuration Mode
AddPac Technology Co.,Ltd.
There is no any specific keyword and argument in this command.
Description
248
- -