Signaling-Port; Timeout - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
voice service VoIP
security permit-FXO
5.7.5.26.

signaling-port

5.7.5.27.

timeout

To set VoIP-related timer parameters, use "timeout" command in the voice
service setup mode.
command before this command.
timeout { t301 | t303 | tras | tttl | tidt | treg } value
no timeout { t301 | t303 | tras | tttl | tidt | treg }
5.7.5.27.1. Syntax
Keyword / Argument
t301 value
t303 value
tras value
tttl value
tidt value
treg value
AddPac Technology Co.,Ltd.
To return this setup to the default state, use "no"
Timeout value from Q.931 Alert message reception
till Connect message reception.
from 5 to 600, and the default is 180. T301 value is
expressed in seconds.
Timeout value
transmission till initial message reception.
range from 5 to 60 and the default value is 8. T303
value is expressed in seconds.
Timeout value from RAS message transmission till
reply message reception. Values range from 2 to
30, and the default value is 6.
expressed in seconds.
RAS time-to-live timeout value. Values range from
10 to 600, and the default value is 60. Values are
expressed in seconds.
the gatekeeper.
Inter-digit timeout value to enter digits into the
analog voice port. Values range from 1 to 600,
and the default value is 10. Tidt value is expressed
in seconds.
Timeout value for re-registration attempt upon
registration failure in the gatekeeper.
range from 10 to 600 and the default value is 30.
Treg value is expressed in seconds.
Description
Values range
from Q.931 Setup
Tras value is
This value is updated by
message
Values
Values
284
- -