Show Dial-Peer - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.6.6.2. Default Value
No default behavior or values
5.7.6.6.3. Command Mode
Administrator command
5.7.6.6.4. Examples
The following is to display all Codec Class.
show codec class
5.7.6.7.

show dial-peer

To display configuration information for dial peers, use the show dial-peer voice
command. If there is no options, display all information of all Dial-Peer..
show dial-peer {voice |pots| VoIP} [ number | summary ]
5.7.6.7.1. Syntax
Keyword / Argument
voice
pots
VoIP
number
summary
5.7.6.7.2. Default Value
No default behavior or values
5.7.6.7.3. Command Mode
Administrator command
AddPac Technology Co.,Ltd.
Description
Display VoIP and POTS Dial-peer information
Display POTS Dial-peer information
Display VoIP Dial-peer information
Optional) A specific dial peer. This option displays
configuration information for a single dial peer
identified by the number argument. Valid entries
are any integers that identify a specific dial peer,
from 1 to 32767.
Optional) Displays a summary of all voice dial peers
294
- -