Show Commands - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.13.2.

Show commands

With "show" command, the user can check configuration that the device
manager has set and system status.
"Show" command can be used in the Exec mode and the syntaxes are as
follows:
Show {option}: Displays option contents.
"show" command related optional commands are as follows:
access-list [ access-list-number]
1. Shows the access-list that has been set.
2. For more information, see Access-List Configuration in the previous
arp [ip-address for ARP entry]
Shows the contents of the ARP table.
bridge
1.
2.
clock [current/running/start]
Shows the system clock of the current Gateway.
debug-port
show current debug terminal information.
AddPac Technology Co.,Ltd.
1) ip <destnation-ip-address>: Sets IP address of the remote host to send
logging information.
2) port [port-number]: Defines the port number of the remote host to
send logging information.
3) on: Enables logging in the remote host.
chapter.
Shows forwarding/blocking database of the bridge.
For more information, see Bridge Configuration in the previous chapter.
121
- -