AddPac VoiceFinder AP200 User Manual page 283

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
security permit-FXO
no security permit-FXO
5.7.5.25.1. Syntax
This command has no arguments or keywords.
5.7.5.25.2. Default Value
Permit All Calls
5.7.5.25.3. Command Mode
Voice Service Configuration Mode
5.7.5.25.4. Usage Guideline
To keep the security of the calls coming to the FXO port through the network,
the AP200 Gateway provides two methods – "Security permit-FXO" command
and the voice class user. Since it is possible to directly attempt calls to the
PSTN through this FXO port or indirectly attempt calls to the PSTN through the
PBX internal line, unauthorized remote users can attempt calls as well.
prevent unauthorized users' attempting calls, the security shall be kept. Two
security systems that the AP200 Gateway provides have following advantages
and disadvantages.
With "security permit-FXO" command, remote users does not need to enter the
password so they can easily access the network. However, IP address of the
VoIP peer on the other side shall be registered and the gatekeeper cannot be
used at the same time. Also, it is impossible to bar calls of the registered peers
by class.
With the "voice class user" users need to enter the password digit but stronger
and multi-classed call barring is possible.
5.7.5.25.5. Examples
The following example permit all call to FXO:
AddPac Technology Co.,Ltd.
To
283
- -