Gateway - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
configuration mode.
5.7.2.4.5. Examples
The following example accesses dial-peer configuration mode and configures
a POTS peer identified as dial peer 10:
configure
dial-peer voice 10 pots
5.7.2.5.

gateway

To enable the H.323 Voice over IP gateway, use the gateway command in
global configuration mode. Use the no form of this command to unregister this
gateway with the gatekeeper.
gateway
no gateway
5.7.2.5.1. Syntax
This command has no keywords or arguments.
5.7.2.5.2. Default Value
The gateway is unregistered.
5.7.2.5.3. Command Mode
Global Configuration Mode
5.7.2.5.4. Usage Guideline
Use the gateway command to enable H.323 VoIP gateway functionality. After
you enable the gateway, it will attempt to discover a gatekeeper by using the
H.323 RAS GRQ message. If you enter no gateway, the VoIP gateway will
unregister with the gatekeeper via the H.323 RAS URQ message.
AddPac Technology Co.,Ltd.
201
- -