Max-Digits - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
default mode besides special case.
5.7.5.18.5. Examples
The following command example shows how to make configuration response
message to change progress message.
voice service VoIP
h323 call response progress
5.7.5.19.

max-digits

This command is used to limit the number of digits for a user class, which in turn
adds to the security of specific out-going signal to the FXO port. The "no"
default value for this command is "0", meaning there is no limitation.
max-digits number
no max-digits
5.7.5.19.1. Syntax
Keyword / Argument
number
5.7.5.19.2. Default Value
The default value is number 0 digit.
5.7.5.19.3. Command Mode
User-class configuration Mode
AddPac Technology Co.,Ltd.
Description
Maximum number of digits for out-going signals
275
- -