AddPac VoiceFinder AP200 User Manual page 50

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
available commands for the corresponding mode and descriptions of
commands.
The VoiceFinder AP200 Gateway provides "History" function.
history function, the operator does not need to enter the command that
the operator had used before. Instead, the operator only needs to use
the numbers on the Gateway prompt.
There are three modes for the Gateway commands, and in each mode,
different commands are used. The following describes commands that
can be used in each mode.
Caution
The commands indicated with "*" among the optional commands are not
currently supported. They are to be supported in the higher version Gateways.
Ex) router# clear ?
counters
*interface
logging
utilization
Caution
To cancel commands, use "no" command.
command for the commands that have default values, the optional values that
had been set before will return to default values.
Ex) router(config)# no ?
access-list
arp
bridge
dhcp-list
ethernet
hostname
interface
AddPac Technology Co.,Ltd.
Clear counters on one or all interfaces
Clear the hardware logic on an interface
Clear logging buffer
Clear system usage information
: Add an access list entry
: Remove a static ARP entry
: Set bridge Parameter to default value
: Configure list entry
: Configure Ethernet
: Set system's network name
: Select an interface to configure
With the
If the operator uses "no"
-
50
-