Fax Protocol - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.4.2. Default Value
The default status is enable mode setting.
5.7.5.4.3. Command Mode
Gateway Configuration Mode
5.7.5.4.4. Usage Guideline
When the VoIP gateway is registered gatekeeper, if this function is activated,
after sending GRQ, and then receiving GCF, and finally sending RRQ. However,
if this is not activated, directly send RRG.
5.7.5.4.5. Examples
The following command example is to perform disable discovery command.
gateway
no discovery
5.7.5.5.

fax protocol

To specify the global default fax protocol for all the Voice over IP (VoIP) dial
peers, use the fax protocol command in voice-service configuration mode. To
return to the default fax protocol, use the no form of this command.
fax protocol { t38 [redundancy value ] | bypass | inband-t38 [redundancy
value ] }
no fax protocol
5.7.5.5.1. Syntax
Keyword / Argument
t38
Inband-t38
AddPac Technology Co.,Ltd.
Description
ITU-T T.38 standard fax protocol.
A conversion of ITU-T T.38 standard fax protocol
sending T.38 information on RTP payload.
257
- -