Gateway Management Command; Command In The Exec Mode - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.12.

Gateway Management Command

This chapter describers commands used in the EXEC mode or the global
configuration mode and necessary for management and operation of the
Gateway in an alphabetical order.
configuration of the Gateway, refer to the previous chapters.
4.12.1.

Command in the EXEC Mode

[Command Formats and Optional Commands]
clear { counters/interface/logging/utilization }
1. Resets certain functions or certain parts of the Gateway.
2. Command options are as follows:
clock [ current/running/start ]
1. Shows the system clock of the Gateway.
2. Command options
3. If there is no option, all values of the three options will be displayed.
configuration
Enters into the configuration mode.
AddPac Technology Co.,Ltd.
1) counters: Clears counters of all interfaces.
2) interface: Resets the hardware logic of a certain interface and
functions as if rebooting certain interfaces.
3) logging: Clears logging buffer. To be implemented later.
4) utilization: Clears system utilization information of the Gateway.
1) current: Shows current time of the Gateway.
2) running: Shows total running time.
3) start: Shows the time that the Gateway started operating.
For commands regarding special
113
- -