Commands Of The Interface Configuration Mode 1 - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.2.3.2.

Commands of the Interface Configuration Mode 1

In the interface configuration mode, the user needs to define a certain
interface before starting configuration.
* For voice related interface commands, see Chapter 5.
Command
bridge
encapsulation
exit
end
Interface
ip
line-ctrl
no
mtu
ppp
rmon
Shutdown
vlan
AddPac Technology Co.,Ltd.
Sets the bridge parameters.
Sets and changes the encapsulation method of the
interface. (AP200 supports Ethernet, IEEE802.1q VLAN,
IEEE802.3 and PPPoE Encapsulation)
Returns to the previous (configuration) menu.
Returns to the initial (Exec) mode.
Selects an interface to set additional interface.
Sets IP protocol and IP service related items.
Change Line Parameter settings for the interface.
Cancels commands entered in the command line or
returns commands into default values.
Sets the size of the IP Maximum Transmission Unit (MTU.)
Sets PPP protocol related parameters.
Sets VLAN parameters for the interface.
Shuts down the selected interfaces.
Sets VLAN parameters for the interface.
Description
57
- -