Force-Starth245 - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.7.5. Example
Following example shows command setting so that SETUP message does
include the h245Address information element.
voice service voip
no force-h245address-at-setup
5.7.5.8.

force-starth245

When a call is established by no tunneling configuration, startH245 procedure
for TCP connection used in H.245 is enabled by this command.
To enable this feature, use force-h245address-at-setup command. To disable
this feature, use no force-h245address-at-setup command. Default setting
value is enable mode.
force-starth245
no force-starth245
5.7.5.8.1. Syntax
Keyword / Argument
No argument and keyword in this command.
5.7.5.8.2. Default Value
disable
5.7.5.8.3. Command Mode
Voice Service Setting Mode
5.7.5.8.4. Usage Guideline
This force-starth245 command can be used for inter-operability with Peer VoIP
gateway. When a call is established by No tunneling configuration, perform
AddPac Technology Co.,Ltd.
Description
261
- -