Plug-In Power - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

3.1.3. Plug-In Power

Warning
STOP
AddPac Technology Co.,Ltd.
The VoiceFinder AP200 Gateway is capable of recognizing and using both
110V and 220V.
The package provides a 220V power cable. If the power supply is 110V,
please use a 110V adapter.
Switching the power switch on will turn the Power LED on the front side of
the Gateway green.
The supply of power will display the booting message on the console
terminal and will turn the RUN LED green
When the Gateway is being booted, the messages are displayed : (Refer
to Diagram 3.3)
The booting title message is displayed. (This message contains
information about the routing software version, Gateway status check
results, memory size and status)
On the display of the log-in message, input the username "root" and
the password "Gateway".
The completion of log-in will display the prompt "1router#" on the
Gateway console terminal.
There are two types of prompts displayed for the VoiceFinder AP200 :
"1router>" and "1router#". The " > " prompt indicates that the user is
not an administrator. At this prompt, the user is unable to use certain
commands : particularly the configuration commands. The " # "
prompt indicates that the user is an administrator(or root), and is
authorized to use all the functions and commands.
40
- -