Shutdown (Dial-Peer) - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.4.12.3. Command Mode
Dial-Peer Configuration Mode
5.7.4.12.4. Usage Guideline
Use the session-target command to specify a network-specific address or
domain name for a dial peer. Whether you select a network-specific address or
a domain name depends on the session protocol you select.
5.7.4.12.5. Examples
The following example configures a session-target IP address "211.238.1.1".
dial-peer voice 10 VoIP
session-target 211.238.1.1
5.7.4.13.

shutdown (Dial-Peer)

To change the administrative state of the selected dial peer from up to down,
use the shutdown dial-peer configuration command. Use the no form of this
command to change the administrative state of this dial peer from down to
up.
shutdown
no shutdown
5.7.4.13.1. Syntax
This command has no arguments or keywords.
5.7.4.13.2. Default Value
No shutdown
5.7.4.13.3. Command Mode
Dial-Peer Configuration Mode
AddPac Technology Co.,Ltd.
247
- -