VoiceFinder AP160 VoIP Gateway Installation Guide Version 1.1
Async (PSTN) Port
VoiceFinder AP160 Gateway offers one (1) RJ11 type PSTN port on the rear panel.
Also, the LEDs indicating the port status are placed on the front panel. Use the
proper cable and connector to access PSTN network with this port.
Ethernet Port
VoiceFinder AP160 Gateway offers two (2) RJ45 type 10BaseTX Ethernet Ports on the
rear panel and LEDs are indicating the port status are on the rear panel. These ports
are physically connected and use a cross cable for LAN1 and use direct cable for
LAN0. The gateway considers these ports as one port, so the user can use only one
part at a time.
RS-232C Serial Console Port
VoiceFinder AP160 Gateway offers one (1) RJ-45 type RS-232C Female DCE
connector on the rear panel. This port is for the initial configuration, monitoring and
debugging.
AddPac Technology Inc.
24
61/