Password Recovery - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.14.2.

Password Recovery

The Gateway manager shall know the password to change Gateway
configuration and check the Gateway status.
manager shall remember the password and keep it confidentially.
chapter describes how to recover the password when the Gateway manager
forgets the password.
The following describes how to recover the password.
[Procedure]
Order
1
2
3
4
5
6
7
Initialize the system in the booter mode, not in the Gateway program state. To
enter into the booter mode, enter Control-X and Control-C keys once or twice
when the booter mode message Appears.
AddPac Technology Co.,Ltd.
Connect the console and prepare to recover the password.
Password recovery shall be made in the console only.
Initialize the system. (Turn on/off the system.)
After the initial messages are displayed, enter Ctrl+x and Ctrl+c once
or twice.
Wait for a while until entering into the boot mode.
Use "Show password" command to check the root password.
Reboot the system.
Log in the system with verified password.
Therefore, the Gateway
Operation
This
129
- -