Activating/Deactivating The Voice Ports; Fax Application; Fax Relay Using Voip H.323; Addpac Technology Co.,Ltd - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.4.2.2.

Activating/Deactivating the Voice Ports

To activate a voice port, use the following commands in voice-port
configuration mode:
Step
1 no shutdown
To cycle a voice port, use the following command in voice-port configuration
mode
Step
1 voice-port
2 no shutdown
5.5.

FAX Application

5.5.1. T.38 FAX Relay using VoIP H.323
The T.38 Fax Relay for VoIP H.323 feature provides standards-based fax relay
protocol support on the most of VoIP router or Gateway including AP200.
Because the T.38 fax relay protocol is standards based, TN2520 can
interoperate with third-party T.38-enabled gateways and gatekeepers in a
mixed-vendor network when real-time fax relay capabilities are required.
Figure 5.9 shows an IP H.323 network with TN2520 routers and third-party
gateways and gatekeepers using T.38 fax relay functionality. By using T.38 fax

AddPac Technology Co.,Ltd.

Command
Command
location
Description
Activate the voice port
Description
Identify the voice port you want to activate and
enter the voice-port configuration mode.
Activate the voice port.
180
- -