Force-H245Address-At-Setup - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.6.5. Examples
The following example shows a fax rate transmission speed of 9600 bps for faxes
sent using a dial peer:
voice service VoIP
fax rate 9600
5.7.5.7.

force-h245address-at-setup

When H.245 no tunneling call is started, this command can be used to include
H.245 address information element in SETUP message. To enable this feature,
use force-h245address-at-setup command. To disable this feature, use no
force-h245address-at-setup command. Default setting value is enable
force-h245address-at-setup
no force-h245address-at-setup
5.7.5.7.1. Syntax
Keyword / Argument
No argument and keyword in this command
5.7.5.7.2. Default value
enable
5.7.5.7.3. Command Mode
Voice Service Setting Mode
5.7.5.7.4. Usage Guideline
For inter-operability with peer side gateway, VoIP user can use this command.
AddPac Technology Co.,Ltd.
Description
260
- -