Max-Forward-Hop - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.3.8.2.

max-forward-hop

When call diversion is set and inbound call busy is occurred, VoIP gateway
performs call forwarding to the other gateway. However, if call-forwarding loop
is existed or cascaded VoIP gateway performs the call forwarding continuously,
VoIP inbound call fall in deadlock. This command can be used to restrict
maximum hop count to protect deadlock state.
max-forward-hop number
no max-forward-hop
5.3.8.2.1. Syntax
Keyword / Argument
number
5.3.8.2.2. Default Value
Default value is Four( 4)
5.3.8.2.3. Command Mode
Dial-Peer Setting Mode
5.3.8.2.4. User Guideline
This command can used to assign the call forwarding maximum number in
max-forward-hop information setting mode by VoIP peer side request..
5.3.8.2.5. Example
Following example shows max-forward-hop 100 setting procedures
max-forward-hop 10
AddPac Technology Co.,Ltd.
Call-forwarding maximum number
Decription
173
- -