Command In The Global Configuration Mode - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.12.2.

Command in the Global Configuration Mode

[Command Formats and Optional Commands]
access-list { option }
1. Sets the access-list for the packet.
2. For more information, see Access-List in the previous chapter.
arp {option}
1. Statically or dynamically registers ARP entries.
2. Option
bridge { option }
1. Sets the bridge.
2. For more information, see Bridge Configuration in the previous chapter.
clock [yy mm dd hh mm ss]
Sets the system clock of the present Gateway.
dhcp-list { option }
1. Sets the DHCP.
2. For more information, see DHCP Configuration in the previous chapter.
Ethernet [full-duplex]
1. Sets the Ethernet interface as full-duplex.
2. The default is half-duplex.
AddPac Technology Co.,Ltd.
1) request [ip-address-number]: Forcefully sends ARP requests for the
host of a certain IP and registers it in the ARP table
2) static <ip-address-number>
registers Mac address in the ARP table for the IP host.
3) table-size <table-size-number>: Sets the size of the ARP table. The
AP200 Gateways supports 10 ~ 256 size.
<mac-address-number>: Statically
117
- -