Codec; Addpac Technology Co.,Ltd - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
The "answer-address" command is used to find the VoIP dial peer for the VoIP
inbound call incoming to the network.
The VoIP dial peer for the VoIP inbound call from the network is selected as
follows:
Firstly, the VoIP dial peer that has the session target matching with the IP
address of the inbound call is searched.
Secondly, if the corresponding peer is not found, the VoIP dial peer that has
answer-address matching with the calling party number of the inbound call will
be searched.
Lastly, if no peer is found, the VoIP dial peer matching with the
destination-pattern of the inbound call will be searched.
5.7.4.1.5. Examples
In the following example, if the calling party number of the inbound VoIP call is
"5263848" VoIP peer 10 will be selected.
dial-peer voice 10 VoIP
answer-address 526....
5.7.4.2.

codec

To specify the voice coder rate of speech for a dial peer, use the codec
dial-peer configuration command. Use the no form of this command to reset
the default value.
codec {g711alaw / g711ulaw / g729r8 / g7231r63 / g7231r53 }
no codec
5.7.4.2.1. Syntax
Keyword / Argument
G711alaw
G711ulaw
G729
G7231r63

AddPac Technology Co.,Ltd.

Description
G.711 A-Law 64Kbps Codec
G.711 u-Law 64Kbps Codec
G.729 8Kbps Codec
G.723.1 6300 bps. This is the default CODEC for
AP200 Gateway.
231
- -