AddPac VoiceFinder AP200 User Manual page 67

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
2. This command functions same as the command that the Gateway
3. The difference from the registration of Gateway users is that "user add"
ppp authentication {CHAP/pap} [callin/{pap/CHAP}]
1. Sets the PPP authentication method as CAHP or PAP in the interface
2. The "callin" option is to connect only incoming calls by CHAP
3. {pap/CHAP} option is to respond to the calls which request both of
ppp chap hostname name
1. This command is for PPP client devices. This command registers a user
2. If this command is not used, the Gateway name (displayed in the
ppp chap password password
This command is for PPP client devices.
password to request connection to the PPP server device when using PPP
CHAP authentication.
ppp pap sent-username username password password
Sets PAP authentication in the PPP client device. When the client device
sets a PPP call, the client device sends the user name and the password to
the server for authentication.
password shall be the same with those set in the server.
command for PAP authentication)
AddPac Technology Co.,Ltd.
manager uses to register a login user. This is because the Gateway
shares the PPP registered user database and the Gateway user
database. The operator registers users as using the same command.
command does not use the registered user level for PPP connection in
the user registration.
configuration mode.
authentication.
CHAP and PAP authentication.
name to request connection to the PPP server device when using PPP
CHAP authentication.
authentication)
Gateway prompt) will be considered as the user name.
(An optional
(An optional command for CHAP authentication)
At this time, the user name and the
command for
This command registers a
(An optional
-
CHAP
67
-