Command Usage; Addpac Technology Co.,Ltd - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.2.

Command Usage

The operator can use all commands of the VOICEFINDER AP200 Gateway
through the consol or Telnet terminal (VTY100 terminal.)
There are three kinds of commands – commands of the user mode, commands
of the manager mode and commands of the configuration mode.
Commands of the user mode enable the operator to check limited information
of the system and provide a connection function for data communication.
Commands of the manager mode enable the operator to check configuration
status of the Gateway and perform debugging.
configuration
environment and set new environment.
The VoiceFinder AP200 Gateway has following features regarding operator's
entering commands.
Although the operator enters only a part of the command, the VoiceFinder
AP200 Gateway automatically recognizes the whole command.
example, if the operator enters only "sh" or "sho" instead of "show" the
VoiceFinder AP200 Gateway automatically recognizes "sh" or "sho" as
"show."
The VoiceFinder AP200 Gateway provides an online help function so the
user can check corresponding items for the command and command
syntax.
The VoiceFinder AP200 Gateway provides "More" function that divides a
long message into several messages so that the operator can see the
whole message by scrolling the screen.
The VoiceFinder AP200 Gateway provides Help and "?" functions to display

AddPac Technology Co.,Ltd.

mode enable the
And commands of the
operator to change configuration
For
49
- -