Public-Ip - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.21.

public-ip

To define public IP address with mapping private IP address of VoIP gateway
under static NAT/PAT network environment, use this command. To make
disable mode, use the no form of this command.
public-ip addr
no public-ip
5.7.5.21.1. Syntax
Keyword / Argument
addr
5.7.5.21.2. Default Value
The default status value is disable mode.
5.7.5.21.3. Command Mode
Gateway Configuration Mode
5.7.5.21.4. Usage Guideline
In case of using private network environment with NAT/PAT, IP address of VoIP
gateway should be set in VoIP interface of AP200 VoIP gateway. On the other
hand, using public network environment under gatekeeper and other gateway,
AP200 VoIP gateway should be defined static NAT or static PAT, and public IP
address.
5.7.5.21.5. Examples
The following command example shows public IP configuration mode.
AddPac Technology Co.,Ltd.
Description
Define IP address setting for example 211.238.72.3.
277
- -