Vad - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.4.15.2. Default Value
No translation rule is applied.
5.7.4.15.3. Command Mode
Dial-Peer Configuration Mode
5.7.4.15.4. Usage Guideline
This command is applied to the POTS peer and the VoIP peer.
"Translation-rule" command for the outbound call of the corresponding dial
peer, and apply the number translation rule that has been set before.
5.7.4.15.5. Examples
In the following example, translation rule set 10 is created and it is applied to
the calling party number of dial-peer 200.
number of the outbound call is 93450, it will be translated into 9563450.
translation-rule 10
dial-peer voice 200 VoIP
5.7.4.16.

vad

To enable voice activity detection (VAD) for the calls using this dial peer, use
the vad dial-peer configuration command. Use the no form of this command
to disable VAD.
vad
no vad
AddPac Technology Co.,Ltd.
rule 0 9 956
rule 1 8 878
translate-outgoing calling-number 10
Therefore, if the calling party
Use
250
- -