Translate-Voip-Incoming - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.27.2. Default Value
See the above.
5.7.5.27.3. Command Mode
Voice-Service Configuration Mode
5.7.5.27.4. Usage Guideline
This command is to partially set the global voice-service for the VoIP service.
A proper value has been set as the default value of the timeout.
recommended to use the default value in most of cases.
5.7.5.27.5. Examples
In the following example, the timeout value of the RAS message has been set
as three seconds..
voice service VoIP
timeout tras 3
5.7.5.28.

translate-VoIP-incoming

Use this command to apply the translation rule to every inbound VoIP call. To
remove application of the translation rule, add "no" command to the above
command.
translate-VoIP-incoming { called-number | calling-number } tag
no translate-VoIP-incoming { called-number | calling-number }
5.7.5.28.1. Syntax
Keyword / Argument
called-number
calling-number
tag
AddPac Technology Co.,Ltd.
Description
Applies the translation rule to the inbound called
party number.
Applies the translation rule to the inbound calling
party number.
Refers the rule set. Ranges from 0 to 65535.
It is
285
- -