Call-Diversion Command Setting; Call-Diversion - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

5.3.8. call-diversion Command Setting

5.3.8.1.

call-diversion

To enter the call diversion mode, use the call-diversion command in Global
command mode. To delete the call diversion configuration, use the no
call-diversion command.
call-diversion tag
no call-diversion tag
5.3.8.1.1. Syntax
Keyword / Argument
tag
5.3.8.1.2. Default Value
No default value.
5.3.8.1.3. Command Mode
Global Setting Mode
5.3.8.1.4. User Guideline
This command can used to enter into call-diversion information setting mode.
The generated call-diversion identifier can be referenced in dial peer part.
5.3.8.1.5. Usage Example
Following example shows the call-diversion 100 setting procedures
call-diversion 100
AddPac Technology Co.,Ltd.
call-diversion identifier
cfb ipaddr 211.111.111.1
Explanation
172
- -