Voip-Interface - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.2.12.2. Default Value
No Default Value
5.7.2.12.3. Command Mode
Global Configuration Mode
5.7.2.12.4. Usage Guideline
Use the voice service command to switch to voice-service configuration mode
from global configuration mode and to specify a voice encapsulation type.
Use the exit command to exit the voice-service configuration mode and return
to the global configuration mode.
5.7.2.12.5. Examples
The following example shows how to access voice-service configuration mode
and specify VoIP parameters, beginning in global configuration mode:
voice service VoIP
5.7.2.13.

VoIP-interface

To set an interface in which the VoIP is going to operate, use "VoIP-interface"
command in the global setup mode.
To set the interface as the default, use "no" command before this command.
VoIP-interface interface-name
no VoIP-interface
5.7.2.13.1. Syntax
Keyword / Argument
AddPac Technology Co.,Ltd.
Description
213
- -