Security Permit-Fxo - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
security password string
no security password
5.7.5.24.1. Syntax
Keyword / Argument
string.
5.7.5.24.2. Default Value
Disabled
5.7.5.24.3. Command Mode
Gateway Configuration Mode
5.7.5.24.4. Examples
The following example set password "okok1234":
gateway
security password okok1234
5.7.5.25.

security permit-FXO

The outgoing call from remote side to FXO of this system to PSTN or PABX route
is security concerned. To protect a call from un-secure user in remote side,
when security permit-FXO is disabled, the call from remote side that is not
registered in session target list of VoIP dial-peer will be dropped.
When session target is set to "ras" with gatekeeper, this command should be
set to permit all call to the FXO (This command is only useful without
gatekeeper). If no form of this command is used, security is enabled and do
not permit a call from unregistered VoIP peer.
AddPac Technology Co.,Ltd.
Description
security code which could be sequence of ASCII
characters. (max length 55)
282
- -