AddPac VoiceFinder AP200 User Manual page 155

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
the VoIP peer. While the above method sets only one CODEC, creating a
CODEC class makes several CODEC lists and enables flexible negotiation with
the VoIP router.
Create CODEC classes as follows:
Step
1 Router# configure
2 Router(config)# voice class codec
3 Router(config-class)# codec preference
codec-type
4 Router(config-class)# codec preference
codec-type
5 Router(config-class)# exit
Then, save CODEC classes created above in a certain VoIP peer by the
following method.
Step
1 dial-peer voice
2 voice-class
codec-class-tag
The following example shows how to create CODEC class 99 and store it in the
VoIP peer 108.
voice class codec 99
codec preference 1 g7231r63
codec preference 2 g729
dial-peer voice 108 VoIP
voice-class codec 99
AddPac Technology Co.,Ltd.
Command
Command
tag
VoIP
codec
Enters into the configuration mode.
Enters
tag
configuration mode.
The tag is an identifier of the
CODEC class.
Enters into the configuration mode.
value
Enters into the configuration mode.
value
Terminates
configuration
configuration
configuration becomes valid.)
Description
Enters into the dial-peer setup mode to set the
VoIP peer.
Selects a
considering the voice coder rate.
Description
into the CODEC
the CODEC
mode.
is completed,
CODEC for the
155
-
class
class
(After
voice
-