AddPac VoiceFinder AP200 User Manual page 110

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
[Procedure]
Order
1
2
3
4
5
6
7
[Related Commands and Syntax]
snmp community <snmp-manager-ip/0.0.0.0> <community-string> {ro/rw}
1. Register the Gateway in a certain SNMP community.
2. <snmp-manager-ip/0.0.0.0>:
3. Community-String:
4. {ro/rw}: Sets whether to only read Gateway information or read and
snmp host <trap-host-ip> <community-string> {v1/v2c}
1. Registers the host to which the Gateway sends trip and the SNMP
2. <trap-host-ip>: IP address of the trap host (SNMP manager)
3. Community-String: String to be used for authentication during SNMP
4. {v1/v2c}: SNMP version
AddPac Technology Co.,Ltd.
Move to the configuration mode.
Set a SNMP community.
Set the host to receive SNMP trap.
Set SNMP related parameters.
Moves to the IP configuration mode.
Apply the queue-group that has been set to the corresponding serial
interface.
Use "show snmp" command to check if configuration has been
correctly made.
"0.0.0.0" is an option that enables all NMSs that have same
community-string values to function as the manager of the SNMP.
communication
write setting values of the Gateway.
version when trap occurs.
communication
Operation
IP address
String used for authentication
of the SNMP Manager.
during
-
SNMP
110
-