AddPac VoiceFinder AP200 User Manual page 131

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
show :
telnet :
Verify "root" command that is currently set.
password is "Gateway.
3 BOOT# sh password
password = "Gateway"
To change current password in the booter, enter into the configuration mode
and change the password as using "passwd" command.
The following is when changing "root" command into "Gateway1".
[Example] Password Change Configuration and Usage
1 BOOT# conf
1 BOOT(config)# ?
2 BOOT(config)# passwd ?
3 BOOT(config)# passwd Gateway ?
4 BOOT(config)# passwd Gateway Gateway ?
5 BOOT(config)# passwd Gateway Gateway1
6 BOOT(config)#
AddPac Technology Co.,Ltd.
Show running system information
Open a telnet connection
address : Set the IP address of an interface
clock : Manage the system clock
exit : Exit from the EXEC
history : Show command line history
passwd : Change password
<new password> New Password
<repeat new password> New Password for confirm
< cr >
password changed
The following is when "root"
131
- -