Description (Voice Port) - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.3.2.4. Usage Guideline
Use the connection command to specify a connection mode for a specific
interface. For example, use the connection plar command to specify a PLAR
interface. The string you configure for this command is used as the called
number for all calls coming in over this connection. The destination peer is
determined by called number.
5.7.3.2.5. Examples
The following example selects PLAR as the connection mode on the AP200,
with a destination telephone number of 555-9262:
receiver connected to the voice port 1/0 is hooked off, a call will be
automatically sent to 5559262.
voice-port 1
connection plar 5559262
5.7.3.3.

description (voice port)

To include a description of what this voice port is connected to, use the
description voice-port configuration command. Use the no form of this
command to disable this feature.
description string
no description
5.7.3.3.1. Syntax
Keyword / Argument
string
AddPac Technology Co.,Ltd.
Description
Description Character String on the Port.
(max length 255)
In this example, if the
218
- -