Call Pickup Related Command Setting; Inbound-Pots-Peer Related Command Setting - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.3.10.

Call Pickup Related Command Setting

Generally, PBX supports call pickup function when VoIP gateway provides the
VoIP service via PBX. However, if analog phone is connected to VoIP
gateway's FXS ports directly, AddPac VoIP gateway supports the call pickup
function for PBX's call pickup function role.
AddPac VoIP gateway supports the call pickup service as a default function or
activates the call pickup service using following commands
dial-peer call-pickup #11
In above example, call pickup code #11, when a specific FXS port is ringing
state in multi-port VoIP gateway, if call pickup code is pressed sequencially
after hook off in the other FXS port in VoIP gateway, the other FXS port can
receive ringing inbound VoIP call.
If user wants to deactivate the call pickup function, no dial-peer call-pickup
command can be used.
STEP
Router# configure
1
2 Router(config)# dial-peer call-pickup
<0-9|#|*> + IA5 digits
5.3.11.

Inbound-pots-peer Related Command Setting

When network interfaces of VoIP gateway are normal and communication
between VoIP gateway and gatekeeper is normal, all call conversion is
occurred via VoIP network.
However, when network interface of VoIP gateway and communication with
gatekeeper is abnormal, user does not use the VoIP service via Internet. In case,
user can use PSTN service via PSTN back-up features. AddPac VoIP gateway
supports the inbound-pots-peer for PSTN backup features.
AddPac VoIP gateway deactivates inbound-pots-peer service as a default
function or activates the inbound-pots-peer service using following commands
AddPac Technology Co.,Ltd.
Commands Explanation
Enter into configuration setting mode.
Call-pickup operation mode
176
- -