Counter - AddPac VoiceFinder AP200 User Manual

Voicefinder ap200 voip gateway (residential gateway)
Hide thumbs Also See for VoiceFinder AP200:
Table of Contents

Advertisement

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.5.2.4.
Usage Guideline
The gateway at opposite ends of the WAN may have to negotiate the codec
selection for the network dial peers. The codec preference command specifies
the order of preference for selecting a negotiated codec for the connection.
5.7.5.2.5.
Examples
The following example creates codec preference list 99 and applies it to dial
peer 1919:
voice class codec 99
voice class codec 99
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g7231r63
codec preference 4 g729
end
dial-peer voice 1919 VoIP
voice-class codec 99
5.7.5.3.

counter

To set VoIP-related counter parameter value, use "counter" command in the
voice service setup mode. To convert this setup into the default state, use
"no" command before this command.
counter { cras } value
no counter { cras }
5.7.5.3.1.
Syntax
Keyword / Argument
cras value
AddPac Technology Co.,Ltd.
Description
RAS message retransmission counter with the
gatekeeper.
The value ranges from 1 to 5, and the default is 3.
255
-
-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VoiceFinder AP200 and is the answer not in the manual?

Table of Contents